Anamet Electrical, Inc.
Anamet Electrical, Inc.
1000 Broadway Ave.
East PO Box 39 Mattoon, IL 61938

Phone: (800) 230-3718
Fax: (800) 677-2706
Email: sales@anametelectrical.com
Website: www.anacondasealtite.com
Print Back

Conduit shall be Anaconda SEALTITE® Type CW. Conduit shall provide a flexible liquid-tight raceway for wiring and shall be constructed of continuously interlocked hot dipped zinc galvanized steel core with an integral bonding wire in sizes 1/2" thru 1-1/4". Conduit shall have a sunlight resistant and flame retardant PVC jacket in electrical trade sizes 1/2" thru 3". Conduit shall be UL listed, CSA certified and IP 67 rated when installed with approved end connectors.
Unit of Measure

Specifications

Type

 N/A CW

Electrical Trade Size

 N/A 3 in78 mm

Length

 N/A 25 ft7.62 m

Packaging

 N/A Standard Carton

Inside Diameter

 N/A 3.070 to 3.100 in77.978 to 78.740 mm

Outside Diameter

 N/A 3.460 to 3.500 in87.884 to 88.900 mm

Approx. Inside Bend Radius

 N/A 15 in381 mm

Approx. Weight per 100 ft

 N/A 264 lbs119.7 kg

Color

 N/A BLUE

Note

 N/A

Other colors available upon request.
3/8" & 4" trade sizes available on special order.

Industry Certifications

 N/A
UL Listed & CSA Certified

Cross-Reference #

 N/A 281024 55-16-99-03 6409-22-00 CBLA-18 CBLT-3 ULBLUE

Core Material

 N/A Galvanized Steel

Ingress Protection (IP) Rating

 N/A Ingress Protection (IP) 66/67

Jacket Material

 N/A Polyvinyl Chloride (PVC)

Jacket Benefits

 N/A Liquid Tight Oil Resistant

Installation

N/A

  • Conduit used with standard liquid-tight connector for easy installation. IP 67 Rated when installed with approved connectors.
  • Approved for both exposed and concealed locations. Rated for temperature ranges -40ºF to + 176ºF (-40ºC to +80ºC).
  • Approved as an equipment grounding conductor in sizes 1/2" through 1-1/4, if the total grounding path is 6 ft. or less and the circuit conductors are protected by over 20 amps for 1/2" and 60 amps or less for 3/4" through 1-1/4".
  • Suitable for use in hazardous locations per NEC Articles 501 Class I Div. 2, Article 502 Class II Div. 1 & 2, Article 503 Class III Div. 1 & 2.
  • Manufactured in a full range of trade sizes from 1/2" through 3".
  • Approved for direct burial and in concrete trade sizes 1/2" through 3".
  • Complies with UL Standard 360 File No. E18917; CSA C22.2 File No. 158897; and NEC Article 350.

NEC Articles

N/A

  • Article 250.118 (6) Equipment Grounding
  • Article 300.22 (D) Information Technology Equipment
  • Article 350 Liquid-Tight Flexible Metal Conduit (LFMC)
  • Article 501.10 (B) (2) Class I Div. 2
  • Article 502.10 (A) (2) and (B) (2) Class II Div. 1 & 2
  • Article 503.10 (A) (3) and (B) Class III Div. 1 & 2
  • Article 620.21 Elevator Wiring Methods
  • Article 645.5 (E) (2) Under Raised Floors

Application

N/A

Computer Wiring Meets Requirements of NEC
Temperature Range: -40°F to +176°F (-40°C to +80°C)